Processor: 1 x HPE DL160 Gen9 Intel® Xeon® E5-2680v4 (2.4GHz/14-core/35MB/120W) Processor Kit
Memory: HPE 16GB (2x8GB) Single Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
Network Controller: HPE Embedded Dual Port 361i Adapter Network Interface
Raid Controller: HPE Smart Array P440/4G Controller
Hard Drive: None ship standard
Internal Storage: 4 LFF HDD Bays
Optical Drive Bay: 1; (Optional: DVD-ROM, DVD-RW)
Optical Drive: Optional Slim Optical Bay (SATA DVD-RW/ROM Optical Drive)
HPE ProLiant DL160 Generation9 (Gen9) |
The HPE ProLiant DL160 Gen9 is the next generation 2P 1U value server replacing DL360e Gen8. It delivers the right balance of performance, storage, reliability, manageability and efficiency in a dense and compact chassis, to meet the needs of a diverse set of customers- from SMBs and service providers with a wide range of workloads - from general purpose IT to the New Style of IT, such as, Big Data and Cloud. |
|
|
|
||
Front View |
|||
|
|||
1 |
Access Panel |
2 |
Optional USB3.0 (optional with 8SFF only) |
3 |
Optical disk drive bay |
4 |
Serial label pull tab |
5 |
Power On/Standby button and system power LED |
6 |
Health LED |
7 |
NIC status LED |
8 |
USB 2.0 connector |
9 |
UID button/LED |
10 |
8SFF drive cage |
|
|
||
Rear View |
|||
|
|||
1 |
PCIe3 slot 1 (primary, associated with processor 1) |
2 |
PCIe3 slot 2 (primary, associated with processor 1) |
3 |
PCIe3 slot 3 (secondary, associated with processor 2) |
4 |
Power supply 1 bay |
5 |
Power supply 1 Power Connector (Optional) |
6 |
Power supply 1 LED (Optional) |
7 |
Power supply 2 bay |
8 |
Power supply 2 power connector |
9 |
Power Supply 2 LED |
10 |
Embedded 2x1GbE network adapter |
11 |
Unit ID LED |
12 |
Video Connector |
13 |
USB3.0 connectors |
14 |
Dedicated iLO connector (optional) |
|
|
||
Internal View |
|||
|
|||
1 |
Hot Swappable fans (up to 7) |
2 |
Processor heat sinks (processors with HPE Smart Sockets placed below heat sinks) |
3 |
HPE Smart Storage Battery (optional) |
4 |
DDR4 DIMM slots (up to 16). Shown fully populated in 16 Slots (8 per Processor) |
5 |
Entry level power supply bay (1x900W shown) |
6 |
Connector for secondary PCIe riser (associated with CPU2) |
NOTE: RPS (with one module) shown in the picture above. |
8 |
HPE Smart Array P440 controller (optional) |
|
7 |
Embedded 2x1GbE network adapter |
10 |
Dedicated iLO module connector (optional) |
9 |
Primary PCIe riser (2 PCIe3 slots associated with CPU1) |
12 |
Internal SATA ports (one for ODD and another one reserved) |
11 |
MicroSD card slot |
14 |
Embedded B140i SATA controller (2x SATA ports for up to eight drives) |
13 |
Internal USB 3.0 connector |
|
|
NOTE: For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Processor |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Chipset |
Intel® C610 Series Chipset |
Intel® E5-2600v3 Processor Family |
|
Intel® E5-2600v4 Processor Family |
|
NOTE: For more information regarding Intel® chipsets, please see the following URL: http://www.intel.com/products/server/chipsets/ |
|
|
On System Management Chipset |
HPE iLO (Firmware HPE iLO4 2.0 or later) 2GB NAND NOTE: Read and learn more in the iLO QuickSpecs. |
|
Memory One of the following depending on model |
Type: |
||
HPE SmartMemory |
|||
DDR4 Registered (RDIMM) or Load Reduced (LRDIMM) |
|||
DIMM Slots Available |
16 |
(8 DIMM slots per processor, 4 channels per processor, 2 DIMMs per channel) |
|
Maximum Capacity (LRDIMM) |
1TB |
(16 x 64GB LRDIMM @2400MHz) |
|
Maximum Capacity (RDIMM) |
512GB |
(16 x 32GB RDIMM @2400MHz) |
|
|
Memory Protection |
Advanced ECC |
Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip. |
Online Spare |
Memory online spare mode detects a rank that is degrading and switches operation to the spare rank. |
|
Mirroring mode |
Memory mirroring inter-socket stores a copy of memory with dynamic failover in case of failure. Once a DIMM in a mirrored set is detected as failed, the mirror failover uses its mirrored DIMM. |
|
|
||
Network Controller |
HPE Ethernet 1Gb 2-Port 361i Adapter |
|
|
Expansion Slots |
||||||
CPU1 PCIe riser slots |
Expansion Slots # |
Technology |
Bus |
Connector Width |
Form Factor |
Notes |
1 |
PCIe 3.0 |
x16 |
x16 |
Full-height, half-length slot |
Processor 1 |
|
2 |
PCIe 3.0 |
x8 |
x8 |
Low profile slot |
Processor 1 |
|
NOTE: Bus Width data indicates the number of physical electrical lanes running to the connector. |
||||||
CPU 1 FlexibleLOM riser slots |
Expansion Slots # |
Technology |
Bus |
Connector Width |
Form Factor |
Notes |
1 |
Flexible LOM |
x8 |
x8 |
Flexible LOM |
Processor 1 (can only be used for FlexibleLOMs) |
|
2 |
PCIe 3.0 |
x8 |
x8 |
Low profile slot |
Processor 1 |
|
NOTE: This riser is mandatory for installing FlexibleLOMs. |
||||||
CPU2 riser PCIe slots |
Expansion Slots # |
Technology |
Bus |
Connector Width |
Form Factor |
Notes |
3 |
PCIe 3.0 |
x16 |
x16 |
Low profile slot |
Processor 2 |
|
NOTE: When populating slots on CPU2 riser, second processor must be installed. NOTE: Only one of the CPU1 PCIe risers can be selected in any given configuration. NOTE: One of the CPU 1 risers is mandatory for all configurations. |
||||||
|
Storage Controller |
Entry Models |
HPE Dynamic Smart Array B140i Controller |
HPE H240 FIO Smart Host Bus Adapter |
||
Base Models |
HPE H240 FIO Smart Host Bus Adapter |
|
Performance Models |
|
|
NOTE: B140i provides support for up to 8 SATA drives, data transmission speeds up to 6Gb/s and supports RAID 0, 1 & 5. NOTE: H240 provides support for up to 8 SAS/SATA drives, data transmission speeds up to 12Gb/s and supports RAID 0, 1 & 5. NOTE: P440 provides support for up to 8 SAS/SATA drives, data transmission speeds up to 12Gb/s. |
||
|
Internal Storage Devices |
Optical Drive |
Optional: DVD-ROM, DVD-RW |
Hard Drives |
None ship standard |
|
Hard Drive Bays |
4 LFF drive bays total with Optical bay |
|
8 SFF drive bays total with Optical Bay |
||
NOTE: HPE ProLiant DL160 Gen9 server offers both SFF and LFF versions. The Optical Drive bay is available with both models. |
||
|
Maximum Internal Storage |
|
CAPACITY |
CONFIGURATION |
Hot Plug SFF SAS |
16.0TB |
8 x 2TB |
|
Hot Plug SFF SATA |
16.0TB |
8 x 2TB |
|
Hot Plug LFF SAS |
40.0TB |
4 x 10TB |
|
Hot Plug LFF SATA |
40.0TB |
4 x 10TB |
|
Hot Plug SFF SAS SSD |
30.72TB |
8 x 3.84TB |
|
Hot Plug SFF SATA SSD |
30.72TB |
8 x 3.84TB |
|
Hot Plug LFF SATA SSD |
15.36TB |
4 x 3.84TB |
|
Non Hot Plug LFF SATA |
16TB |
4 x 4TB |
|
|
Power Supply |
HPE 550W FIO Power Supply |
HPE 900W Redundant Power Supply |
|
Looking for high-efficiency power solutions at an entry-level price for your ProLiant Gen9 Essential Server? HPE Entry-Level Power Supplies offer an optimized set of features with options for both redundant and non-redundant power configurations. |
|
|
System Fans |
Non-redundant |
Redundant |
|
1P model |
3 fans |
4 fans |
|
|
Non-redundant |
Redundant |
|
2P model |
6 fans |
7 fans |
|
NOTE: Redundant fan option kit (PN: 725587-B21) can be bought separately if redundancy is required with 1P or 2P configurations. NOTE: Additional fans required with 2P configurations are included in "-B21" processor option kits. |
|||
|
Interfaces |
Video |
1 (Vaux Support) |
LOM Network Ports |
2x1GbE network ports |
|
HPE iLO Remote Management Network Port |
1 GbE (Optional) |
|
USB |
4 USB ports (standard); 1 (optional) |
|
Micro SD Slot |
1 Micro SD |
|
NOTE: The SD slot is not a hot-pluggable device. Customers should not attempt to plug an SD card into the SD slot while the server is powered. |
||
|
Operating Systems and Virtualization Software Support for ProLiant Servers |
|
NOTE: For more information on the Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/ossupport and our driver download page http://h20566.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=7268998. |
|
|
Upgradeability |
Upgradeable to 2 processors (36 Cores) NOTE: Processor upgrade from E5-2600v3 to E5-2600v4 is supported for processors up to 105W. |
Up to 16 DIMM slots available NOTE: To take advantage of DIMMs 9-16, second processor must be installed. |
|
FlexibleLOM slot for 1GbE or 10GbE or QDR/FDR InfiniBand Networking Options |
|
Optional 2nd CPU riser slot (x16, low profile) NOTE: 2nd CPU must be installed if this riser is configured. |
|
Up to 8 SFF Hard Drive Bays; or 4 LFF Hard Drive Bays |
|
Redundant Power Supply |
|
Redundant Fan |
|
Optical Drive Bay (8 SFF/4 LFF) |
|
|
Industry Standard Compliance |
ACPI 2.0b Compliant |
PCIe 3.0 Compliant |
|
PXE Support |
|
WOL Support |
|
Microsoft® Logo certifications |
|
USB 3.0 Support |
|
ASHRAE A3 |
|
NOTE: Supports A3 extended ambient temperature. NOTE: Refer to technical specifications section for more details. |
|
|
Graphics |
Integrated Matrox G200eH2 video standard
|
|
HPE Server UEFI/Legacy ROM |
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen9 platform defaults to UEFI and can be factory or field configured for Legacy BIOS Boot Mode. NOTE: The UEFI System Utilities function is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more information, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI. |
|
Form Factor |
1U Rack form factor |
8SFF and 4LFF version: |
|
1.7" (4.3cm) Height x 17.1" (43.5cm) Width x 23.9" (60.8cm) Length |
|
|
Embedded Management |
HPE Integrated Lights-Out |
Monitor your servers for ongoing management, service alerting, reporting and remote management with HPE iLO. Learn more at http://www.hpe.com/info/ilo. |
|
||
UEFI |
Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI). Learn more at http://www.hpe.com/servers/uefi. |
|
|
||
RESTful API |
RESTful API for iLO 4 is Redfish 1.0 conformance for simplified server management such as configuration and maintenance tasks based on modern industry standards. Learn more at http://www.hpe.com/info/restfulapi. |
|
|
||
Intelligent Provisioning |
Hassle free server and OS provisioning for 1 or few servers with Intelligent Provisioning. Learn more at http://www.hpe.com/servers/intelligentprovisioning. |
|
|
||
Embedded Remote Support |
The Hewlett Packard Enterprise embedded remote support, when used with Insight Online direct connect or HPE Insight Remote Support, allows HPE ProLiant servers to transmit hardware events directly to Hewlett Packard Enterprise or a Hewlett Packard Enterprise Authorized Partner for automated phone home support. Learn more at http://www.hpe.com/info/insightonline/explore. |
|
|
Server utilities |
Smart Update |
Optimize firmware and driver updates with Smart Update solutions including Smart Update Manager (SUM) and Service Pack for ProLiant (SPP). Learn more athttp://www.hpe.com/servers/smartupdatemanager. |
|
||
HPE Systems Insight Manager (HPE SIM) |
HPE SIM allows you to monitor the health of your HPE ProLiant Servers and HPE Integrity Servers, and also provides you with basic support for non-HPE servers. HPE SIM also integrates with Smart Update Manager to provide quick and seamless firmware updates. Learn more at http://www.hpe.com/servers/hpsim. |
|
|
||
Scripting Tool Kit and Windows PowerShell |
Provision 1 to many servers using your own scripts to discover and deploy them with Scripting Tool Kit (STK) for Windows and Linux or Scripting Tools for Windows PowerShell. Learn more at http://www.hpe.com/servers/proliant/stk orhttp://www.hpe.com/servers/powershell. |
|
|
||
RESTful Interface Tool |
RESTful Interface tool is a scripting tool to provision using RESTful API for iLO 4 to discover and deploy servers at scale. Learn more athttp://www.hpe.com/info/resttool. |
|
|
||
HPE iLO Mobile Application |
Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit:http://www.hpe.com/info/ilo/mobileapp. |
|
|
||
HPE Insight Online |
HPE Insight Online, available at no additional cost as part of your Hewlett Packard Enterprise warranty or contractual support agreement with Hewlett Packard Enterprise, is a personalized dashboard for simplified tracking of IT operations and support information from anywhere, anytime. Learn more athttp://www.hpe.com/info/insightonline/explore. |
|
|
Security |
Power-on password |
Serial interface control |
|
Administrator's password |
|
TPM 2.0 TPM 2.0 NOTE: TPM 1.2 is not upgradable to TPM 2.0. |
|
UEFI |
|
|
Warranty |
This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of HPE Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HPE Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. NOTE: Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/.
|