P38474-B21 HPE ProLiant DL325 Gen10 Plus v2 4LFF Configure-to-order Server
Processor: AMD EPYC 7343 3.2GHz 16-core 190W Processor for HPE
Memory: 1 x HPE 32GB (1x32GB) Dual Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit
Network Controller: Intel I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE
Raid Controller: Broadcom MegaRAID MR416i-a x16 Lanes 4GB Cache NVMe/SAS 12G Controller for HPE Gen10 Plus
Hard Drive: None included (4LFF Chassis)
Optical Drive: Not included (Optical Drive options available)
PCI-Express Slots: 2-slots (x16, x16) as standard
Power Supply: 1 x HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Form Factor: Rack (1U)
Warranty : 3-year parts, 3-year labor, 3-year onsite support with next business day response.
HPE ProLiant DL325 Gen10 Plus v2 server The HPE ProLiant DL325 Gen10 Plus v2 is a secure and versatile single socket server for virtualization, I/O intensive and storage intensive workloads.
Powered by the 3rd generation AMD® EPYC® 7003 Series processor, the HPE ProLiant DL325 Gen10 Plus v2 offers greater processing power. On top of that, the chassis is smaller compared to the previous generation providing better compatibility to your infrastructure. Tri-mode RAID controller support provides flexibility to support across SAS/SATA/NVMe types of storage options.
This 1P, 1U server delivers an exceptional balance of processor, memory and I/O for 2P performance at 1P TCO. Get the most out of your virtualized environment with this versatile server. |
|||
![]() |
|||
8SFF Front View |
|||
1. |
Quick removal access panel |
6. |
USB 3.1 Gen1 port |
2. |
Serial no. label pull tab |
7. |
NIC status LED |
3. |
Optional Media Bay* |
8. |
iLO Service Port |
4. |
Health LED |
9. |
UID button/LED |
5. |
Power On/Standby button and system power LED |
10. |
Standard 8 SAS/SATA/NVMe Hot Plug drive bays |
Notes: - * Option Shown: No media - * Optional: +2SFF U.3 SAS/SATA/NVMe drives (total max 10SFF) - * Optional: +2SFF U.2 NVMe drives (total max 10SFF) - * Optional: 9.5 mm SATA DVD-ROM/RW Optical Drive |
![]() |
|||
Internal View 8SFF chassis |
|||
1. |
Optional HPE Flexible Smart Array Controller (Type -a shown) |
7. |
Primary PCIe riser, standard |
2. |
Chassis intrusion detection connector |
8. |
(Under) OCP 3.0 Slot |
3. |
Hard drive backplane power connector |
9. |
Internal USB 3.1 Gen1 connector |
4. |
Hot Plug redundant HPE Flexible Slot Power supplies |
10. |
Processor (heatsinks shown) |
5. |
Connection for (optional) secondary riser |
11. |
Fan cage shown with 8 Performance Hot-swappable fans |
6. |
Serial Port Connector |
12. |
DDR4 DIMM slots. Only 8 slots are populated as shown. |
![]() |
|||
Rear View |
|||
1. |
Slot 1 PCIe 4.0 |
6. |
USB 3.1 Gen1 Ports (2) |
2. |
Slot 2 PCIe 4.0 |
7. |
iLO Management Port |
3. |
Optional Slot 3 PCIe 4.0 |
8. |
VGA port |
4. |
Hot-plug Power Supply 1 and 2 (Optional) |
9. |
Optional: OCP 3.0 Slot (not shown) |
5. |
UID LED |
|
|
|
|||
What’s New
https://www.hpe.com/us/en/about/environment/msds-specs-more.html for more information. |
|||
|
|||
Platform Information |
|||
|
|||
Form Factor
Chassis Types
Notes: - Mixing LFF & SFF is not supported - When a 8 SFF chassis is selected, minimum one 8 SFF SAS/SATA, 8 SFF NVMe U.3 or 8 SFF NVMe U.2 backplane kit must be selected - When a 4 LFF chassis is selected, one 4 LFF SAS/SATA backplane kit must be selected - The 8 SFF can be upgraded with either an additional 2 SFF drive kit for a total 10 SAS/SATA drives or 2SFF NVMe Kit for a total of 8 SAS/SATA + 2 NVMe drives or an optional Optical Drive - The 8 SFF NVMe chassis can be upgraded with either an additional 2SFF NVMe kit for a total of 10 NVMe drives or 2SFF drive kit for a total of 8NVMe + 2 SAS/SATA drives or an optional Optical Drive
System Fans
|
|||
|
Processors – One of the following depending on model. Notes: For more information regarding AMD EPYC processors, please see the following: |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Notes: - All AMD EPYC processors can support up to 4TB of memory each. - Rome processors can’t support 2 DIMM per channel @3200MT/s. Rome processors support 2DPC @2933MT/s. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Chipset No chipset – System on Chip (SoC) design. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
On System Management Chipset HPE iLO 5 ASIC Notes: Read and learn more in the iLO QuickSpecs. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Memory One of the following depending on model |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Notes: The maximum memory speed is dependent on the DIMM selection. |
Memory Protection
Advanced ECC Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip. |
||||||||||||||||||||||||
|
||||||||||||||||||||||||
Expansion Slots |
||||||||||||||||||||||||
|
||||||||||||||||||||||||
|
||||||||||||||||||||||||
Notes: Bus Width Indicates the number of electrical lanes running to the connector. |
||||||||||||||||||||||||
|
||||||||||||||||||||||||
Notes: - Bus width indicated the number of electrical lanes running to the connector. - Secondary riser supports both Low Profile or FHHL cards, when FHHL card is installed, slot 2 will not be available. |
||||||||||||||||||||||||
|
||||||||||||||||||||||||
Storage Controllers The Gen10/Gen10 Plus controller naming framework has been updated to simplify identification as depicted below. For a more detailed breakout of the available Gen10/Gen10 Plus Smart Array controllers visit the HPE Smart Array Gen10 Controllers Data Sheet.
HPE also launched Tri-Mode controllers which will support NVMe U.3/U.2 drives as wells as SAS/SATA drives. Please see below list for the tri-mode controllers supported on the server. |
||||||||||||||||||||||||
NVMe Boot Device
Software RAID – HPE Smart Storage SR100i SR Gen10 Plus SW RAID
Notes: Requires SATA drives installed on following backplanes and drive bay position to support SR100i.
|
Notes: Requires NVMe drives installed on following backplanes and drive bay position to support SR100i.
Essential RAID Controller
Performance RAID Controller
Notes: Performance RAID Controllers require the HPE 12W Smart Storage Battery (782961-B21) which is sold separately. |
||||||||||||||||||||||||
|
||||||||||||||||||||||||
Tri-Mode RAID Controller
Notes: MR216i-a and MR216i-p controllers do not need the support of a smart storage battery. |
||||||||||||||||||||||||
|
||||||||||||||||||||||||
Internal Storage Devices One of the following depending on model
Optical Drive
Hard Drives
|
||||||||||||||||||||||||
|
||||||||||||||||||||||||
|
||||||||||||||||||||||||
|
|
||||||||||||
|
||||||||||||
Power Supply
Notes: Available in 94% Power Efficiency.
Notes: Available in 94% Power Efficiency.
Notes: - Available in 96% Power Efficiency. - 200-240VAC power input only.
Notes: - Available in 94% Power Efficiency. - 277VAC power input.
Notes: - Available in 94% Power Efficiency. - -48VDC power input.
Notes: - Available in 94% Power Efficiency. - 200-240VAC power input only.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen10 Plus Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page. To review the power requirements for your selected system, please use the HPE Power Advisor Tool.
For information on power specifications and technical content visit HPE Server power supplies. |
||||||||||||
|
||||||||||||
Operating Systems and Virtualization Software Support for ProLiant Servers
|
Notes: For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server. https://www.hpe.com/us/en/servers/server-operating-systems.html |
|
Graphics
Integrated Video Standard
HPE iLO 5 on system management memory
|
|
Industry Standard Compliance
Notes: For additional technical thermal details regarding ambient temperatures, humidity and features support please visit: http://www.hpe.com/servers/ashrae.
Notes: UEFI is the default for the DL325 Gen10 Plus. Legacy mode can be selected in the field or as a CTO option (758959-B22). |
|
Embedded Management
HPE Integrated Lights-Out (HPE iLO) Monitor your servers for ongoing management, service alerting, reporting and remote management with HPE iLO. Learn more at http://www.hpe.com/info/ilo. |
|
UEFI Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI). |
|
Intelligent Provisioning Hassle free server and OS provisioning for 1 or more servers with Intelligent Provisioning. Learn more at https://support.hpe.com/hpesc/public/docDisplay?docId=c04465280&docLocale=en_US |
|
iLO RESTful API iLO RESTful API is Redfish API conformance and offer simplified server management automation such as configuration and maintenance tasks based on modern industry standards. Learn more at http://www.hpe.com/info/restfulapi. |
|
HPE Server UEFI/Legacy ROM Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen10 Plus servers have a UEFI Class 2 implementation and support both UEFI Mode (default) and Legacy BIOS Mode. UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
Notes: - For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI. - UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory for your HPE ProLiant Gen10 Plus Server. |
|
Server Utilities
Active Health System The HPE Active Health System (AHS) is an essential component of the iLO management portfolio that provides continuous, proactive health monitoring of HPE servers. Learn more at http://www.hpe.com/servers/ahs. |
|
Active Health System Viewer Use the Active Health System Viewer, a web-based portal, to easily read AHS logs and speed problem resolution with HPE self-repair recommendations, to learn more visit: http://www.hpe.com/servers/ahsv. |
|
Smart Update Keep your servers up to date with the HPE Smart Update solution by using Smart Update Manager (SUM) to optimize the firmware and driver updates of the Service Pack for ProLiant (SPP). Learn more at |
|
iLO Amplifier Pack Designed for large enterprise and service provider environments with hundreds of HPE servers, the iLO Amplifier Pack is a free, downloadable open virtual application (OVA) that delivers the power to discover, inventory and update Gen8, Gen9, Gen10 and Gen10 Plus HPE servers at unmatched speed and scale. Use with an iLO Advanced License to unlock full capabilities. Learn more at http://www.hpe.com/servers/iLOamplifierpack. |
|
HPE iLO Mobile Application Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit: http://www.hpe.com/info/ilo/mobileapp. |
|
RESTful Interface Tool RESTful Interface tool (iLOREST) is a single scripting tool to provision using iLO RESTful API to discover and deploy servers at scale. Learn more at http://www.hpe.com/info/resttool. |
|
Scripting Tools Provision one to many servers using your own scripts to discover and deploy with Scripting Tool (STK) for Windows and Linux or Scripting Tools for Windows PowerShell. Learn more at http://www.hpe.com/servers/powershell. |
|
HPE OneView Standard HPE OneView Standard can be used for inventory, health monitoring, alerting, and reporting without additional fees. It can monitor multiple HPE server generations. The user interface is similar to the HPE OneView Advanced version, but the software-defined functionality is not available. Learn more at http://www.hpe.com/info/oneview. |
|
HPE Systems Insight Manager (HPE SIM) Ideal for environments already using HPE SIM, it allows you to monitor the health of your HPE ProLiant Servers and HPE Integrity Servers. Also provides you with basic support for non-HPE servers. HPE SIM also integrates with Smart Update Manager to provide quick and seamless firmware updates. Learn more at http://www.hpe.com/info/hpesim. |
|
Security
|
|
Warranty This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of HPE Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HPE Pointnext operational services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
Notes: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/. |