P44113-B21 HPE PROLIANT DL20 Gen10 Plus E-2314, 16GB, 2LFF, None HDD, 350W, 4y TC Basic
Processor: Intel Xeon E-2314 2.8GHz 4-core 65W FIO Processor for HPE
Memory: 1 xHPE 16GB (1x16GB) Single Rank x8 DDR4-3200 CAS-22-22-22 Unbuffered Standard Memory Kit
Network Controller: HPE embedded 1Gb 2-port BCM5720 network Adapter
Raid Controller: Embedded Intel VROC SATA software RAID
Hard Drive: None included
Internal Storage: 2 LFF HDD Bays (Hot Plug)
PCI-Express Slots: 2 PCIe 4.0 slots
Power Supply: (1) 290W Non-redundant Power Supply
Form Factor: Rack (1U), HPE Short Friction Rail Kit
Warranty : 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response
H32ZGE : HPE 4 Year Tech Care Basic DL20 Gen10 Plus HW SVC
HPE ProLiant DL20 Gen10 Plus server |
|||
The dense and compact HPE ProLiant DL20 Gen10 Plus server powered by Intel® Xeon® E and Pentium® Processors provides a unique blend of enterprise class capabilities & value. It offers outstanding configuration flexibility to cater to a wide variety of business requirements at an affordable price point. Deploy this dense platform for diverse workloads in space constrained environments and maintain it with ease by automating the most essential server lifecycle management tasks with HPE iLO 5. |
|||
|
|||
|
|||
2 LFF Front View Gen10 Plus |
|||
1. |
Access Panel |
7. |
Health LED |
2. |
Optical drive bay |
8. |
NIC Status LED |
3. |
Serial number/iLO information pull tab |
9. |
USB 3.2 Gen1 Port |
4. |
Front Fan Assembly |
10. |
iLO Service Port (USB) |
5. |
System Power LED |
11. |
Two-bay LFF hot-plug drive bays |
6. |
UID LED |
|
|
![]() |
|||
4 (+2) SFF Front View Gen10 Plus |
|||
1. |
Access Panel |
7. |
Health LED |
2. |
2 SFF hot-plug drive bays (optional) |
8. |
NIC Status LED |
3. |
Serial number/iLO information pull tab |
9. |
USB 3.2 Gen1 Port |
4. |
Front Fan Assembly |
10. |
iLO Service Port (USB) |
5. |
System Power LED |
11. |
Four-bay SFF hot-plug drive bays |
6. |
UID LED |
|
|
![]() |
|||
Internal View - Standard for all 2LFF DL20 Gen10 Plus |
|||
1. |
Fan cage shown with 2 fans |
7. |
Not shown: Optional Smart Storage Battery |
2. |
Processor shown with heat sink |
8. |
Modular Smart Array connector |
3. |
Four DDR4 DIMM Slots |
9. |
TPM 2.0 Gen10 |
4. |
System Battery |
10. |
PCIe Riser |
5. |
Central fan assembly (3rd fan) |
11. |
Not shown : Dedicated iLO/M.2 LP Enablement Kit |
6. |
Power Supply (1x290W shown) |
|
|
|
||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
Rear View – Standard for all DL20 Gen10 Plus |
|
|||||||||||||||||||||||||||||||
1. |
Slot 1 PCIe 4.0 |
6. |
Two USB 3.2 Gen1 Ports |
|
||||||||||||||||||||||||||||
2. |
Slot 2 PCIe 4.0 |
7. |
NIC Port (1Gb) |
|
||||||||||||||||||||||||||||
3. |
Option: Serial Port |
8. |
NIC port (1Gb) / Sideband iLo management port (configurable in RBSU) |
|
||||||||||||||||||||||||||||
4. |
290W Non hotplug Power Supply |
9. |
VGA port |
|
||||||||||||||||||||||||||||
5. |
UID LED |
10. |
Dedicated iLO Management Port (Default) |
|
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
What’s New
|
|
|||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
Platform Information
Form Factor
Chassis Types
System Fans
Notes: This applies for all three chassis: 2LFF NHP, 2LFF HP and 4SFF HP |
|
|||||||||||||||||||||||||||||||
|
|
Processors Intel® Xeon® E Processors are designed to deliver the best combination of performance, built-in capabilities, and cost-effectiveness. Choose one of the following processors based on the model. Notes: - For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon - This table covers the public offering only. - Models indicated by "G" are limited to local display. Intel processor graphic full features are not supported on Intel Xeon E-2300 server platforms.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Chipset Intel® C256 Chipset Notes: For more information regarding Intel® chipsets, please see the following URL: http://www.intel.com/products/server/chipsets/. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
On System Management Chipset HPE iLO 5 ASIC Notes: Read and learn more in the iLO QuickSpecs. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Memory
HPE DDR4 Unbuffered Memory (UDIMM)
4 (4 DIMM slots per processor, 2 channels per processor, 2 DIMMs per channel)
128 GB (4 x 32GB UDIMM @ 2933 MT/s) Notes: - The maximum memory speed depends on processor model. - For Server Memory Population Rules for HPE ProLiant Gen10 Plus Servers with Intel® Xeon® E-2300 Processors see details here: http://www.hpe.com/docs/server-memory. For General Server Memory and DIMM Population Rules and Guidelines for Gen10 Plus see details here: http://www.hpe.com/docs/memory-population-rules. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Memory Protection
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Internal Storage Devices
Optical Drive
Hard Drives
|
||||||||||||||||||||||||||||||||||||
Network Controller Embedded Broadcom BCM5720 Ethernet 1Gb 2-port BASE-T Adapter
The HPE ProLiant DL20 Gen10 Plus server offers the customer a dual-port NIC standard with the option to upgrade with a variety of networking options. Notes: - Support document and downloads including firmware and drivers for the Broadcom BCM5720 Ethernet 1Gb 2-port BASE-T LOM Adapter can be downloaded from the supplier’s support and services webpage . - ProLiant DL20 Gen10 Plus with Intel Xeon E-2300 processors comes with Intel i225 (LOM) on board. - ProLiant DL20 Gen10 Plus system does not support Networking SR-IOV. |
||||||||||||||||||||||||||||||||||||
Expansion Slots
Notes: Bus Width indicates the number of physical electrical lanes running to the connector. |
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
Storage Controllers For a more detailed breakout of the available Smart Array controllers visit the HPE Smart Array Gen10 Controllers Data Sheet
Software RAID Intel VROC SATA SW RAID Notes: - The embedded Intel Virtual RAID on CPU (Intel VROC) is the SATA software RAID controller supported in this server. - All models feature an embedded storage controller Intel VROC SATA. - BIOS Default is SATA AHCI. Embedded Intel SATA VROC is disabled by default. Embedded Intel SATA VROC can be enabled in BIOS/Platform Configuration (RBSU) for SW RAID features. - For Linux users, HPE offers a solution that uses in-distro open-source software to create a two-disk RAID 1 boot volume. For more information visit: https://downloads.linux.hpe.com/SDR/project/lsrrb/ - RAID support – 0/1/5/10. - RAID setting cannot be factory ordered/configured for use with Intel VROC SATA as Intel VROC SATA must be enabled in BIOS by customer. - Intel VROC SATA does not support RAID volume creation with different form factors of drives (e.g., SFF + M.2) - Intel VROC SATA RAID supports Windows Server and Linux, but does not support VMware. - Intel VROC SATA will operate in UEFI mode, Windows OS environment, and Linux OS environment. - Required to install AMS tools in OS for supporting drives thermal sensor reading for thermal fan control, otherwise may experience acoustic noise impact. - Both Intel® Xeon® E processors and Intel® Pentium® processors support Intel® VROC SATA Raid. - See HPE Support Center for additional information regarding installation of Intel® VROC (SATA RAID): Enabling Intel VROC (SATA RAID) for SATA or sSATA on BIOS/Platform configuration (RBSU) - Intel VROC SATA RAID cannot be created in Intelligent Provisioning. It must be installed manually. - Intel VROC requires the server boot mode to be set to UEFI Mode. - Obtain the Intel VROC downloads (drivers, GUI) specific for your system OS. For direct download links, see the OS-specific VROC guide: https://www.hpe.com/support/IntelVROC-Gen10Plus-docs - Intel VROC supports RAID management though the following tools:
|
||||||||||||||||||||||||||||||||||||
Essential RAID Controllers
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
Performance RAID Controllers
Notes: For additional details, please see HPE Smart Array Gen10 Controllers Data Sheet. |
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
Maximum Storage
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
Power Supply
- P21649-B21, HPE DL20 Gen10 Plat 290W FIO Power Supply Kit - P45476-B21, HPE ProLiant DL20 Gen10 Plus 290W FIO Power Supply Kit Notes: - Both 290W Power Supplies support both Pre-Configured Models and Configured Factory Integrated Models - P21649-B21, Available in 92% efficency - P45476-B21, Available in 94% efficiency, currently available in EMEA only
- 865408-B21, HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit Notes: Available in 94% efficiency. - 865434-B21, HPE 800W Flex Slot -48VDC Platinum Hot Plug Low Halogen Power Supply Kit Notes: Flex Slot -48VDC power supplies support power efficiency of up to 94%. - P45948-B21, HPE DL20 Gen10 Plus RPS FIO Enable Kit Notes: RPS Kit required and must be added when using redundant power supplies
|
HPE Entry-Level Power Supplies provide lower-cost options for customers trying to balance their need for enterprise class efficiency and reliability while maintaining lowest possible hardware costs. The above mentioned Entry-Level power supply options have been designed specifically for HPE ProLiant DL20 Gen10 Plus server.
The HPE 290W Non-redundant Power Supply is the standard, non-redundant AC power supply and is optimized for the DL20 Gen10 Plus rack server.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen10 Plus Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool.
For information on power specifications and technical content visit HPE Server power supplies. |
||||||||||
|
||||||||||
|
||||||||||
Interfaces
|
||||||||||
|
||||||||||
|
||||||||||
Operating Systems and Virtualization Software
Notes: VMware supported only with Intel® Xeon® E processors, not supported with Intel® Pentium® processors. No Legacy Mode Support on VMWare. https://kb.vmware.com/s/article/84233
Notes: For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server https://www.hpe.com/us/en/servers/server-operating-systems.html. |
||||||||||
|
Upgradeability
One of the following depending on model
|
|
Graphic
Integrated Matrox G200 video standard
HPE iLO 5 on system management memory
|
|
Industry Standard Compliance
Notes: For additional technical thermal details regarding ambient temperatures, humidity and features support please visit: http://www.hpe.com/servers/ashrae.
Notes: Effective 01 March 2020. Among other requirements, for servers this directive establishes power thresholds for idle state, as well as efficiency and performance in active state which vary among configurations. HPE ProLiant DL20 Gen10 and Gen10 Plus servers are compliant with Lot 9 requirements. For more information regarding HPE Lot 9 conformance, please visit: https://www.hpe.com/us/en/about/environment/msds-specs-more.html |
|
HPE Server UEFI/ROM Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen10 Plus servers have a UEFI Class 2 implementation and support UEFI Mode (default). Notes: The UEFI System Utilities function is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more information, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
|
UEFI Boot Mode only:
Notes: - For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI. - Legacy FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory for your HPE ProLiant Gen10 Plus Server |
|
Embedded Management
HPE Integrated Lights-Out (HPE iLO) Monitor your servers for ongoing management, service alerting, reporting and remote management with HPE iLO. Learn more at http://www.hpe.com/info/ilo. |
|
UEFI Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI). Learn more at http://www.hpe.com/servers/uefi. |
|
Intelligent Provisioning Hassle free server and OS provisioning for one or more servers with Intelligent Provisioning. Learn more at http://www.hpe.com/servers/intelligentprovisioning |
|
iLO RESTful API iLO RESTful API is Redfish API conformance and offers simplified server management automation such as configuration and maintenance tasks based on modern industry standards. Learn more at http://www.hpe.com/info/restfulapi. |
|
Server Utilities
Active Health System The HPE Active Health System (AHS) is an essential component of the iLO management portfolio that provides continuous, proactive health monitoring of HPE servers. Learn more at http://www.hpe.com/servers/ahs. |
|
Active Health System Viewer Use the Active Health System Viewer, a web-based portal, to easily read AHS logs and speed problem resolution with HPE self-repair recommendations, to learn more visit: http://www.hpe.com/servers/ahsv. |
|
Smart Update Keep your servers up to date with the HPE Smart Update solution by using Smart Update Manager (SUM) to optimize the firmware and driver updates of the Service Pack for ProLiant (SPP). Learn more at http://www.hpe.com/info/smartupdate |
|
iLO Amplifier Pack Designed for large enterprise and service provider environments with hundreds of HPE servers, the iLO Amplifier Pack is a free, downloadable open virtual application (OVA) that delivers the power to discover, inventory and update Gen8, Gen9 and Gen10 HPE servers at unmatched speed and scale. Use with an iLO Advanced License to unlock full capabilities. Learn more at http://www.hpe.com/servers/iLOamplifierpack. |
|
HPE iLO Mobile Application Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit: http://www.hpe.com/info/ilo/mobileapp |
RESTful Interface Tool RESTful Interface tool (iLOREST) is a single scripting tool to provision using iLO RESTful API to discover and deploy servers at scale. Learn more at http://www.hpe.com/info/resttool |
Scripting Tools Provision one to many servers using your own scripts to discover and deploy with Scripting Tool (STK) for Windows and Linux or Scripting Tools for Windows PowerShell. Learn more at http://www.hpe.com/servers/powershell |
|
HPE OneView Standard HPE OneView Standard can be used for inventory, health monitoring, alerting, and reporting without additional fees. It can monitor multiple HPE server generations. The user interface is similar to the HPE OneView Advanced version, but the software-defined functionality is not available. Learn more at http://www.hpe.com/info/oneview |
|
HPE Systems Insight Manager (HPE SIM) Ideal for environments already using HPE SIM, it allows you to monitor the health of your HPE ProLiant Servers and HPE Integrity Servers. Also provides you with basic support for non-HPE servers. HPE SIM also integrates with Smart Update Manager to provide quick and seamless firmware updates. Learn more at http://www.hpe.com/info/hpesim |
|
Security
|
Notes: Intel® SGX is supported in selective processors. Please refer to the Standard Features – Processor section. |
|
Warranty This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of Hewlett Packard Enterprise Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HPE Pointnext operational services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
Notes: - Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/ |