P53925-B21 HPE ProLiant DL385 Gen11 8LFF Configure-to-order Server
Processor: 1 x AMD EPYC 9124 3.0GHz 16-core 200W Processor for HPE
Memory: 1 x HPE 32GB (1x32GB) Single Rank x4 DDR5-4800 CAS-40-39-39 EC8 Registered Smart Memory Kit
Network Controller: Broadcom BCM5719 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE
Raid Controller: HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller
Hard Drive: None ship as standard
Internal Storage: 8 LFF Chassis
PCI-Express Slots: One standard in primary riser, up to Eight slots with 2 processors
Power Supply: 1x HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Form Factor: Rack (2U)
Warranty : 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response
HPE ProLiant DL385 Gen11 |
|||
The new HPE ProLiant DL385 Gen11 server is an accelerator-optimized 2U 2P solution that delivers exceptional compute performance, upgraded high-speed data transfer rate and memory depth at 2P compute capability. Powered by 4th Generation AMD EPYC™ 9004 Series Processors with up to 96 cores, increased memory bandwidth (up to 6TB), high-speed PCIe Gen5 I/O, Gen5 EDSFF storage and the newly designed chassis supporting 8 single wide (SW) or 4 double wide (DW) GPUs*. The HPE ProLiant DL385 Gen11 server is a perfect accelerator-optimized 2U 2P solution.
Notes: * EDSFF and the new GPU offering will be available in 1H’ 2023. Subject to change. |
|||
|
|||
HPE ProLiant DL385 Gen11 SFF Server- Front View |
|||
1. |
Quick removal access panel |
7. |
UID button |
2. |
Power On/Standby button and system power LED button |
8. |
Drive Bay 3. 8 SFF U.3 optional |
3. |
Health LED |
9. |
Drive Bay 2. 8 SFF U.3 optional |
4. |
iLO front service port |
10. |
Drive Bay 1. 8 SFF U.3 or Universal Media Bay optional |
5. |
NIC status LED |
11. |
Serial label pull tag |
6. |
USB 3.2 Gen1 |
|
|
![]() |
|||
HPE ProLiant DL385 Gen11 - Rear View |
|||
1. |
Primary Riser: PCI Slots (Slots 1–3 top to bottom) |
7. |
HPE Flexible Slot Power Supply bay 2 |
2. |
OCP 3.0 Slot |
8. |
VGA connector |
3. |
Secondary Riser: PCI Slots (Slots 4–6 top to bottom) |
9. |
Serial port (optional) |
4. |
Tertiary Riser: (Slots 7–8 top to bottom, not shown). Optional rear 2 SFF cage |
10. |
Dedicated iLO management port |
5. |
Hot pluggable M.2 Boot Device (optional, not shown) |
11. |
USB 3.2 Gen1 ports |
6. |
HPE Flexible Slot power supply bay 1 |
|
|
|
HPE ProLiant DL385 Gen11 - Internal View |
||||
1. |
DDR5 DIMM slots. Shown populated in 24 slots |
7. |
Primary PCIe riser cage |
|
2. |
Hot Pluggable M.2 Boot Device bracket |
8. |
(Under) OCP 3.0 Slot 1 |
|
3. |
(Under) Up to 2 Hot Plug redundant HPE Flexible Slot Power supplies |
9. |
2x USB 3.2 Gen1 ports (one under primary riser cage) |
|
4. |
Rear 2SFF drive cage |
10. |
Fan cage shown with 6 Performance Hot-plug fans |
|
5. |
Secondary PCIe riser cage |
11. |
2 Processors (heatsinks shown) |
|
6. |
(Under) OCP 3.0 Slot 2 |
|
|
|
What’s New:
|
|
Platform Information
Form Factor
|
|
Chassis Types
Notes: - DL385 Gen11 uses Basic Carrier drive cages. - The 4 LFF rear drive box will consume space for the primary, secondary and tertiary risers. - 3x 8 SFF drive cages can be used to build up a 24 SFF configuration. - The 12 LFF configuration needs to be built up with 8LFF chassis and one 4LFF drive cage. - The Universal Media Bay (P57857-B21) not available with the LFF chassis or the 24 SFF (3x 8SFF cages) configuration, and can only be populated in Box 1. - U.3 x1 and U.3 x4 drive cages CAN mix. |
|
System Fans Standard – fan types included
Notes: - The DL385 Gen11 supports up to 6 fans with fan redundancy built in. One fan rotor failure will place server in degraded mode but fully functional. Two fan rotor failures could provide warning and imminent server shutdown. - Each Fan kits are designated to operate under different configuration. For more information, please refer to the Cooling option message in the Unique option section. |
|
Processors Up to 2 of the following depending on model. Notes: For more information regarding AMD EPYC processors, please see the following: https://www.amd.com/en/products/epyc
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Notes: - All AMD EPYC processors can support up to 3TB of memory each under 1DPC, 12 channel per processor. 6TB of memory per two processors. - 160 PCIe 5.0 lanes support with two sockets. Motherboard supports 3XGMI two-processor interconnect by default. - The wattage information indicates the default cTDP (Configurable TDP) of the processor. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Chipset No chipset – System on Chip (SoC) design. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
On System Management Chipset HPE iLO 6 ASIC
Read and learn more in the iLO QuickSpecs. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Memory One of the following depending on model |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
Notes: - All processors support up to 6TB memory per server when 2 processors are supported. - LRDIMM and Persistent Memory are not supported. - For additional information, please see the HPE DDR5 SmartMemory QuickSpecs. - For General Server Memory Population Rules and Guidelines for Gen11 see details here: http://www.hpe.com/docs/memory-population-rules
Memory Protection Advanced ECC Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip. |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
Expansion Slots
Primary Riser Notes: - Bus width indicates the number of physical electrical lanes running to the connector. - There are three Primary riser configurations:
- When both Primary Slot1 & OCP Slot21 (OCP1) are supported, Slot1 & Slot21 (OCP1) combined can only support up to 112GB/s bandwidth due to processor limitation |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Secondary Riser: Notes: - Bus width indicates the number of physical electrical lanes running to the connector. - There are four Secondary riser configurations:
- When both Secondary Slot6 & Tertiary Slot7 are supported, Slot6 & Slot7 combined can only support up to 112GB/s bandwidth due to processor limitation
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Tertiary Riser Notes: - Bus Width Indicates the number of physical electrical lanes running to the connector. - There is one type of Tertiary riser configuration by selecting HPE DL385 Gen11 2x16 Tert FIO Riser Kit (P57893-B21) - When both Secondary Slot6 & Tertiary Slot7 are supported, Slot6 & Slot7 combined can only support up to 112GB/s bandwidth due to processor limitation |
||||||||||||||||||||||||
|
||||||||||||||||||||||||
|
||||||||||||||||||||||||
Storage Controllers The Gen11 controller naming framework has been updated to simplify identification as depicted below. For a more detailed breakout of the available Gen11 Smart Array controllers visit the controller data sheet
|
||||||||||||||||||||||||
NVMe Boot Device HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device Notes: - NS204i-u does not occupy a PCIe slot and is externally accessible. - 2pcs of 480GB M.2 NVMe SSD are included in the NS204i-u Hot Plug Boot Device - RAID 1 supported on the NS204i-u Hot Plug Boot Device. - There are three locations where NS204i-u Hot Plug Boot Device can be supported:
|
||||||||||||||||||||||||
Software RAID – NO Software RAID is support on AMD Gen11 servers |
||||||||||||||||||||||||
Smart Array Controller
|
||||||||||||||||||||||||
|
||||||||||||||||||||||||
Notes: For additional details, please visit: |
||||||||||||||||||||||||
|
||||||||||||||||||||||||
Internal Storage Devices One of the following depending on model
Optical Drive
Hard Drives
|
||||||||||||||||||||||||
|
Graphics
Integrated Video Standard
HPE iLO 6 on system management memory
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
Power Supply
Notes: Available in 94%. Power Efficiency
Notes: - Available in 94% Power Efficiency. - 200-240VAC power input only.
Notes: - Available in 94% Power Efficiency. - 200-240VAC power input only. |
||||||||||||||||||||||||||||||
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen11 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center. All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool.
For information on power specifications and technical content visit HPE Server power supplies. |
||||||||||||||||||||||||||||||
|
Interfaces
|
||||||||||||||||||
|
||||||||||||||||||
UEFI Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI).
Learn more at http://www.hpe.com/servers/uefi. |
||||||||||||||||||
|
||||||||||||||||||
Operating Systems and Virtualization Software Support for ProLiant Servers
Notes: For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server. https://www.hpe.com/us/en/servers/server-operating-systems.html |
||||||||||||||||||
|
||||||||||||||||||
HPE Server UEFI Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen11 servers have a UEFI Class 2 implementation. Notes: The UEFI System Utilities tool is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more information, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as
|
UEFI Boot Mode only
Notes: - For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI. - Enabling TPM 2.0 no longer requires TPM module option kit for Gen11. It is an embedded feature. |
|
Industry Standard Compliance
Notes: This support is on the optional Universal Media Bay.
Notes: This support is on the optional Universal Media Bay.
|
https://www.hpe.com/us/en/about/environment/msds-specs-more.html
Notes: For additional technical thermal details regarding ambient temperatures, humidity and features support please visit: http://www.hpe.com/servers/ashrae.
|
|
Embedded Management
HPE Integrated Lights-Out (HPE iLO) Monitor your servers for ongoing management, service alerting, reporting and remote management with HPE iLO. Learn more at http://www.hpe.com/info/ilo.
UEFI Configure and boot your server(s) securely with industry standard Unified Extensible Firmware Interface (UEFI).
Intelligent Provisioning Hassle free server and OS provisioning for 1 or more servers with Intelligent Provisioning. Learn more at http://www.hpe.com/servers/intelligentprovisioning.
iLO RESTful API iLO RESTful API is Redfish API conformance and offers simplified server management automation such as configuration and maintenance tasks based on modern industry standards. Learn more at http://www.hpe.com/info/restfulapi. |
|
Server Utilities
Active Health System The HPE Active Health System (AHS) is an essential component of the iLO management portfolio that provides continuous, proactive health monitoring of HPE servers. Learn more at http://www.hpe.com/servers/ahs. |
|
Active Health System Viewer The Active System Health Viewer (AHSV) was deprecated as of March 2022. Users are now recommended to use the InfoSight (https://www.hpe.com/us/en/solutions/infosight.html) for Servers Portal for AHS viewing capabilities. In InfoSight for Servers portal, users will also be able to view hardware configuration details, firmware and driver information, warranty and support status of a server, wellness alerts, and create support cases for servers under a valid warranty or support contract.
HPE InfoSight provides the same security assurances as that of AHSV. Furthermore, InfoSight can be used as an AHSV replacement even if customers do not want to share AHSV logs and telemetry data on an ongoing basis. |
|
Smart Update Keep your server(s) up to date with the HPE Smart Update solution by using Smart Update Manager (SUM) to optimize the firmware and driver updates of the Service Pack for ProLiant (SPP). Learn more at |
|
iLO Amplifier Pack Designed for large enterprise and service provider environments with hundreds of HPE servers, the iLO Amplifier Pack is a free, downloadable open virtual application (OVA) that delivers the power to discover, inventory and update Gen8, Gen9 , Gen10 & Gen10 Plus HPE servers at unmatched speed and scale. Use with an iLO Advanced License to unlock full capabilities. Learn more at http://www.hpe.com/servers/iLOamplifierpack. |
|
RESTful Interface Tool RESTful Interface tool (iLOREST) is a single scripting tool to provision using iLO RESTful API to discover and deploy servers at scale. Learn more at http://www.hpe.com/info/resttool. |
|
Scripting Tools Provision one to many servers using your own scripts to discover and deploy with Scripting Tool (STK) for Windows and Linux or Scripting Tools for Windows PowerShell. Learn more at http://www.hpe.com/servers/powershell. |
|
HPE OneView Standard HPE OneView Standard can be used for inventory, health monitoring, alerting, and reporting without additional fees. It can monitor multiple HPE server generations. The user interface is similar to the HPE OneView Advanced version, but the software-defined functionality is not available. Learn more at http://www.hpe.com/info/oneview. |
|
HPE GreenLake for Compute Ops Management HPE is intelligently transforming compute management with a completely new As a Service experience that delivers greater security, simplicity, and efficiency. Discover a completely modernized compute management experience delivered through HPE GreenLake that securely streamlines operations from edge-to-cloud, and automates key lifecycle tasks (onboard, update, manage and monitor HPE servers), bringing the agility and greater efficiencies to wherever compute devices reside via a unified single browser-based interface.
Compute Ops Management is built on a unique cloud-native architecture that abstracts, manages and controls HPE servers regardless of physical location. The management application resides in the HPE GreenLake cloud platform (access via https://console.greenlake.hpe.com) and leverages the HPE GreenLake architecture, security, and unified operations.
Each HPE ProLiant Gen11 rack, tower and micro server will include a 3-year subscription to HPE GreenLake for Compute Ops Management - Standard Tier. Upgrades to Standard Tier 5 Year term or to an Enhanced Tier, 3 or 5 Year term, subscription can be made at time of order. Upgrades to Enhanced tier or OneView can also be made at any time. |
|
Warranty This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of Hewlett Packard Enterprise Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HPE Pointnext operational services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
Notes: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: https://www.hpe.com/us/en/search-results.html?page=1&q=servers%20warranty&autocomplete=0
|
|
Security
Notes: enabling TPM 2.0 no longer requires TPM module option kit for Gen11. It is an embedded feature.
|